systemd中todesk.service出错

csf2001

两台笔记本，同是manjaro，原从AUR中安装的todesk-bin，即1.2.4，之前使用正常，但近期其中一台todesk出现网络错误，查看systemd服务，出错内容如下：

1. ● todeskd.service - ToDesk Daemon Service
   
2.      Loaded: loaded (/etc/systemd/system/todeskd.service; enabled; vendor preset: disabled)
   
3.      Active: failed (Result: exit-code) since Fri 2021-02-26 23:26:08 CST; 6min ago
   
4.     Process: 852366 ExecStart=/opt/todesk/bin/todeskd -f /opt/todesk/config/todeskd.conf (code=exited, status=0/SUCCESS)
   
5.     Process: 852389 ExecStop=/bin/kill -SIGINT $MAINPID (code=exited, status=1/FAILURE)
   
6.    Main PID: 852366 (code=exited, status=0/SUCCESS)
   
7. 
   
8. 2月 26 23:26:08 manjaro todeskd[852366]: /opt/todesk/bin/todeskd() [0x68b526]??:0
   
9. 2月 26 23:26:08 manjaro todeskd[852366]: /opt/todesk/bin/todeskd() [0x690660]??:0
   
10. 2月 26 23:26:08 manjaro todeskd[852366]: /opt/todesk/bin/todeskd() [0x690467]??:0
    
11. 2月 26 23:26:08 manjaro todeskd[852366]: /opt/todesk/bin/todeskd() [0x690330]??:0
    
12. 2月 26 23:26:08 manjaro todeskd[852366]: /usr/lib/libstdc++.so.6(+0xcff62) [0x7f8af5e57f62]??:0
    
13. 2月 26 23:26:08 manjaro todeskd[852366]: /usr/lib/libpthread.so.0(+0x9299) [0x7f8af5fa3299]??:0
    
14. 2月 26 23:26:08 manjaro todeskd[852366]: /usr/lib/libc.so.6(clone+0x43) [0x7f8af5cb8153]??:0
    
15. 2月 26 23:26:08 manjaro kill[852389]: kill: 参数不够
    
16. 2月 26 23:26:08 manjaro systemd[1]: todeskd.service: Control process exited, code=exited, status=1/FAILURE
    
17. 2月 26 23:26:08 manjaro systemd[1]: todeskd.service: Failed with result 'exit-code'.

复制代码

重装无效，从官网下载后pacman安装也无效，同样的出错提示。

csf2001

按出错提示对比两本上的对应的库文件，文件时间大小完全一致:L

csf2001

在终端手动运行 /opt/todesk/bin/todeskd -f /opt/todesk/config/todeskd.conf 出错如下：

1. /opt/todesk/bin/todeskd(_Z9out_stackPKc+0x35) [0x64005f]??:0
   
2. 
   
3. /opt/todesk/bin/todeskd(_Z11signal_exiti+0x82) [0x6401ac]??:0
   
4. 
   
5. /usr/lib/libc.so.6(+0x3cf80) [0x7fbef3de1f80]??:0
   
6. 
   
7. /opt/todesk/bin/todeskd(_ZN9Utilities11GetLocalMacEv+0xfd) [0x6ce82b]??:0
   
8. 
   
9. /opt/todesk/bin/todeskd(_ZN11CenterAgent5LoginERKSs+0xd3) [0x6ab0a3]??:0
   
10. 
    
11. /opt/todesk/bin/todeskd(_ZN6ToDesk17OnCenterConnectedEv+0x67) [0x68b7b3]??:0
    
12. 
    
13. /opt/todesk/bin/todeskd(_ZN11CenterAgent5StartERKSst+0x66) [0x6aa494]??:0
    
14. 
    
15. /opt/todesk/bin/todeskd() [0x68b526]??:0
    
16. 
    
17. /opt/todesk/bin/todeskd() [0x690660]??:0
    
18. 
    
19. /opt/todesk/bin/todeskd() [0x690467]??:0
    
20. 
    
21. /opt/todesk/bin/todeskd() [0x690330]??:0
    
22. 
    
23. /usr/lib/libstdc++.so.6(+0xcff62) [0x7fbef4043f62]??:0
    
24. 
    
25. /usr/lib/libpthread.so.0(+0x9299) [0x7fbef418f299]??:0
    
26. 
    
27. /usr/lib/libc.so.6(clone+0x43) [0x7fbef3ea4153]??:0

复制代码

todesk运行起来就一直这样：

wanli

删除配置文件后重试看看

w0lf

csf2001 发表于 2021-2-26 23:46
在终端手动运行 /opt/todesk/bin/todeskd -f /opt/todesk/config/todeskd.conf 出错如下：

先关闭todesk，然后关闭服务：sudo systemctl stop todeskd.service
把 /opt/todesk/config/todeskd.conf 这个文件删除，
重新启动服务：sudo systemctl start todeskd.service
然后再启动todesk。